SINGLE ROLLER HANGER
* SIZE AVAILABILITY: 3” thru 24”
* FINISH: Black, Galvanized
- The Figure 661 Roller Hanger is for use on high pressure steam lines or where horizontal movement takes place.
- It is made from heavy, low carbon steel bar stock, steel bolts and nuts and a cast iron roller.
- The lower nut on the suspension rod adjusts the pipe to its proper pitch, and this adjustment can be made after the pipe and hanger are in position.
- Maximum temperature at roller contact is 450*F.
- Select size of hanger equal to the size of pipe when used without insulation.
- For covered pipe see saddle schedule, Modern Fig. 341 - 343A for correct size hanger.
- Complies with Federal Specification WW-H-171 (Type 44).
- Complies with Manufacturers Standardization Society SP-69 (Type 43)
NOTE: Nuts and washers need to be used on both sides of the top center for proper installation.
* ORDERING: Specify hanger size, pipe (tube) size, figure number, name and finish.